MDF Panel Moulding | Primed White | Torus

Available in 18×58mm & 18×70mm profiles, in 4.8m, 2.7m & 1.1m lengths.

The Torus profile refers to its distinctive edge shape. It adds a rounded convex detail to interiors.

Primed white MDF with a smooth surface ready for painting.

Very easy — since it's primed MDF, you can paint over it with standard interior paints. Light sanding between coats helps achieve a smooth finish.

Use fine-toothed saws (mitre saw or similar) to cut ends, use adhesive or finishing nails for fixing, ensure joints are tight; fill and touch up any gaps.

Primed MDF is more stable than raw MDF, but still vulnerable to moisture — in damp areas, seal edges and avoid direct water exposure.

Yes — moulding profiles like this are often used as wall panel moulds, shadow lines, or decorative ceiling trims, as long as they’re supported and fixed properly.

Slight variation in profile crispness or surface finish may occur, but MDF is generally consistent. Different batches may vary slightly in priming coverage.

MDF is smoother, more consistent, less likely to have knots or grain imperfections, and usually more affordable. It’s easier to paint but less natural in feel compared to solid wood.

Occasional dusting; repainting or touch‑ups as required; avoid putting stress or moisture on the ends; keep the paint finish intact.